Comprehensive technical guide: setup and use FlashRunner’s command line tools

1. fr_transfer

In the image above you can see how to use the command line tool “fr_transfer”.

2. frbconverter

In the image above you can see how to use the command line tool “frbconverter”.

In the image above you can see an example of its usage.

3. fr_command

In the image above you can see how to use the command line tool “fr_command” and an example on how to open a LAN communication with the FlashRunner. As explained in the previous article, all commands can be executed: a whole simple production process could be handled by a .bat file running commands that are calling this command line tool.