How can I display the Flash content? How can I make a byte-to-byte comparison of the Flash content?

High-Performance, Standalone In-System Programmer

Updated 14/11/2025

Supported
Silicon
Producers

Device Code
Family
Protocol(s)
Memory Size
Algorithm
Commercial Class	Non Mass Market
Big-Size Memory	No

Availability


FlashRunner CUBE

If the device specificiations allows the Flash content reading, READ & DUMP commands are implemented.

READ command prints on the Terminal the selected area.
DUMP command save the selected area read in a binary file. The discrimination between DUMP command for different channels is the prefix (i.e. S01_, S02_) on the output file name.

You can do byte-to-byte comparison using VERIFY READOUT method, which compare original source file with programmed flash area.

Some devices mounts also a MARGIN VERIFY command which let you check if device flashing will respect quality standard and will be stable through years.